Improved oxidation resistance of expanded graphite through nano SiC coating

Expanded graphite with nano SiC and amorphous SiC_xO_y coating was successfully prepared through pyrolysing silane coupling agent (SCA), where the grafting of SCA dominated the final products. The results show that mainly amorphous SiC_xO_y coating covers expanded graphite at 1000 °C, regardless of the SCA concentration. In comparison, nano SiC coating can be synthesized at 1200 °C depending on the good dispersion of SCA (with a SCA concentration of 50 vol%). The formed SiC coating contributes to much higher peak oxidation temperature (812.1 °C) than 678.0 °C of the pure expanded graphite. Meanwhile, the oxidation activation energies of expanded graphite are remarkably improved from 149.15 kJ/mol to 176.16 kJ/mol (based on Kissinger method), attributing to the derived nano SiC and SiC_xO_y coating.     

水下循迹航行器水动力学性能数值研究

为了研究低速水下循迹监测航行器的水动力学性能数值计算问题,采用FLUENT软件和SST剪切应力输运模型,通过雷诺时均N-S方程分析流速一定的情况下,取不同攻角、不同水平舵角作为来流条件,研究未安装推进器以及安装推进器且其安装位置不同时,航行器的升力系数、俯仰力矩系数、表面压力分布和流场速度的变化规律。结果表明:在未安装推进器以及推进器的安装位置不同时,随着攻角的变化,升力系数呈线性变化,俯仰力矩系数呈非线性变化;随着水平舵角的变化,升力系数和俯仰力矩系数呈线性变化。当推进器安装在航行器头部时,对航行器流场压力和流场速度变化影响最大;当安装在航行器尾部时,对二者影响最小。对于低速航行器,应尽量将推进器安装在中间靠后位置,以提高航行器的水动力性能。升力系数的试验结果与数值仿真结果之间最大相差7. 51%,阻力系数的试验结果与数值仿真结果最大相差5. 84%,均吻合较好。研究结果可以为低速水下循迹航行器的优化设计和发展提供理论参考。     

高效膜蒸馏结晶过程的研究进展

全球性的水资源短缺及环境污染问题，使得工业废水处理、海水淡化、高价值溶质综合利用的需求日益迫切。膜蒸馏结晶过程可以充分利用低品质热源，实现高纯度水溶剂分离、盐分结晶制备，对于实现分离过程零排放和协同增效有重要意义。同时，膜蒸馏结晶也可以与多级闪蒸，多效精馏、纳滤、正向渗透、反渗透等过程进行耦合，进一步提高整体分离效率。此外，该过程对于调控晶体外部形貌，制备晶体尺寸分布集中、流动性好的晶体产品也有积极作用。基于此，针对膜蒸馏结晶原理、过程调控机制以及创新过程应用几个方面开展论述，总结了膜蒸馏结晶技术在高效分离、结晶过程精准控制等领域的关键问题和发展趋势。     

两种多层穿梭车系统的性能比较分析

物流配送中心订单响应速度的加快,对订单拣选系统提出了更高的要求。多层穿梭车系统因其柔性强、效率高等特点,近年来得到了广泛应用。多层穿梭车系统具有两种形式--基于转载车和基于环形输送线,二者均可实现货物的快速拣选,但在系统吞吐量和订单完成周期方面存在差异,致使企业决策者难以进行系统选择。基于上述原因,本文比较两种多层穿梭车系统的性能差异。建立两个系统的开环排队网络模型,然后求解系统吞吐量、订单完成周期,通过仿真验证了排队论模型的准确性,通过试验对两种系统的性能进行对比分析。结果表明,系统吞吐量与层数、巷道数相关,层数越多,巷道数越少,转载车系统相对于环线系统优势越显著;订单完成周期与层数、订单到达率相关,层数越多,订单到达率越低,转载车系统相对于环线系统越具优势。     

Image and Feature Space Based Domain Adaptation for Vehicle Detection

The application of deep learning in the field of object detection has experienced much progress. However, due to the domain shift problem, applying an off-the-shelf detector to another domain leads to a significant performance drop. A large number of ground truth labels are required when using another domain to train models, demanding a large amount of human and financial resources. In order to avoid excessive resource requirements and performance drop caused by domain shift, this paper proposes a new domain adaptive approach to cross-domain vehicle detection. Our approach improves the cross-domain vehicle detection model from image space and feature space. We employ objectives of the generative adversarial network and cycle consistency loss for image style transfer in image space. For feature space, we align feature distributions between the source domain and the target domain to improve the detection accuracy. Experiments are carried out using the method with two different datasets, proving that this technique effectively improves the accuracy of vehicle detection in the target domain.     

基于射流冲击作用的舰机适配性数值分析与优化

准确分析和控制射流冲击对航母甲板环境的影响是新型喷气偏流板设计和布局的关键所在。为了确定射流冲击影响最小的偏流板布局，运用有限体积法，采用分区混合网格方案，结合雷诺时均纳维斯托克斯（RANS）方程和SST k-ω湍流模型对喷气偏流板在不同布局下的射流冲击效应进行三维数值模拟。选取舰载机双发动机全加力状态时喷气偏流板与发动机距离不同、喷气偏流板倾角不同共12种布局组合进行射流冲击效应的对比计算,计算结果显示了喷气偏流板各布局下的流场参数、传热特性、尾喷口温升、冲击力和力矩等分布规律。定性和定量分析了燃气射流冲击下温度场和速度场的危险区域，结果表明，偏流板与发动机距离5 m、偏流板倾角45°时的布局更有利于将燃气射流向上引导。在此基础上，基于倾角最小化原则及二次导流原理优化设计了一种导流隔热性能好、工作稳定性高的被动隔热式喷气偏流板装置。     

双弹性板矩形空腔内噪声的有源力控制

研究了在弹性板上施加不同参数的有源力对腔内噪声进行控制的问题。构建双弹性板构成的封闭矩形声腔模型，对封闭声腔的结构 声耦合特性进行分析，推导了在封闭声腔有源力控制作用下声压计算公式，给出采用有源力控制的最优控制模型。分析了弹性板在不同参数的次级力源激励下腔内局部声场的声压级响应，并建立了仿真模型对局部声场的减噪效果进行分析。结果表明，合理选择次级力源的参数对控制效果的影响较为明显，且次级力源的个数并非越多越好。     

Investigation of novel anthracene‐bridged carbazoles as sensitizers and Co‐sensitizers for dye‐sensitized solar cells

Novel anthracene‐bridged carbazole organic dyes (designated ML4 and ML5) were synthesized using the Suzuki coupling reaction. These dyes were designed to be donor‐π‐conjugation‐acceptor sensitizers for dye‐sensitized solar cells, where the carbazole moiety acts as the donor, the anthracene moiety provides the π‐conjugation, and the cyano acrylic acid acts as the acceptor. Solar cells were fabricated with ML4 and ML5 alone with low power conversion efficiencies, but they were also used as co‐sensitizers with N719, improving the efficiency of the dye‐sensitized solar cells produced by ~3% and ~10%, respectively. Copyright © 2015 John Wiley & Sons, Ltd.